Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Table 1. Problems, possible causes, and possible solutions (continued)
Problem: You pressed the Record Symptom button, the blue Searching light flashes, the Success
tone sounds, but the green Success light does not illuminate.
•
Possible cause and solution: Your current environment is too bright to see the green
Success light. Move to a darker environment, press the button again, and wait for a response.
Handling your Patient Assistant
The Patient Assistant is designed for daily use. Precautions should be taken to avoid damaging it.
•
Do not immerse the Patient Assistant in liquid or spill fluid on it.
•
Do not drop or mishandle the Patient Assistant in any way that might cause damage. Contact
your doctor or clinic if the Patient Assistant has been dropped and does not function.
•
Do not open the Patient Assistant. The batteries cannot be replaced.
•
Do not carry the Patient Assistant directly in front of your cardiac device, such as in a shirt or
coat pocket, to avoid accidental recordings.
•
Keep the Patient Assistant at room temperature. Optimal conditions for use are 5 °C (41 °F) to
43 °C (110 °F) with relative humidity up to 93%.
Cleaning
Regularly inspect the Patient Assistant for damage or defects. If it is damaged or if you cannot
troubleshoot the problem, contact your doctor or clinic for assistance.
Be careful to prevent moisture from entering the Patient Assistant. The Patient Assistant is moisture
resistant but not waterproof. Clean the outside of the Patient Assistant with a soft, slightly damp
cloth, as needed. Do not clean the Patient Assistant with solvents (for example, nail polish remover)
or chlorine-based cleansers (for example, bleach).
Using your Patient Assistant
11
Tabla de contenido
