Kohler Sterling 7726 Serie Manual De Instrucciones página 7

Troubleshooting (cont.)
Symptoms
All airjets are functioning
3
but the bubble
concentration is too low
or too high for the user's
preference.
4. Blower motor stops
suddenly.
Sterling
Probable Causes
A. Blower voltage is set too
low/high.
A. Circuit for the outlet has tripped. A. Reset the circuit breaker. Check the
B. The blower motor has
overheated and the protection
device has activated. There is
blockage at the suction, airjets,
and/or blower motor vents.
7
Recommended Action
3. Within 4 seconds of step 2, depress
the air switch button twice.
4. Blower will confirm speed profile
change by turning on for 1 second,
off for 2 seconds, then back on for 1
second.
Repeat above steps to return to
original speed profile.
A. Change blower speed profile to
increase air flow:
1. Unplug the blower from the GFCI
outlet.
2. Plug the blower back in.
3. Within 4 seconds of step 2, depress
the air switch button twice.
4. Blower will confirm speed profile
change by turning on for 1 second,
off for 2 seconds, then back on for 1
second.
Repeat above steps to return to
original speed profile.
wiring. If the problem persists, refer
to your installer or dealer.
B. Remove the blockage, then allow
the blower motor to cool.
1139487-5-F