www.ghibliwirbel.com
Professional Cleaning Machines Since 1968
PROBLEM
The machine does not dry
well, leaving traces of water
on the floor.
No water comes out.
Insufficient floor cleaning.
The brush does not rotate.
Aspirator does not work.
No water comes out.
During the warranty period all defective parts will be repaired or replaced, free of charge.
All parts affected by tampering or misuse will be excluded from the warranty.
In order to enable the warranty procedure please contact your dealer or a relevant service
center by presenting the valid purchase documents.
CAUSE
Suction motor defective.
Aspiration tube blocked.
Dirty wiper.
Recovery tank full.
Dirty water filter clogged.
Squeegee
rubber
worn.
Tank empty.
Tap turned off.
Filter blocked.
Solenoid valve does not
work.
Unsuitable brushes or deter-
gent.
Brush worn.
Defective sensor.
11.1 WARRANTY
EN - 15
SOLUTION
Replace the motor.
Check
and
clean the aspiration tube that
connects the squeegee to
the recovery tank.
Clean the wiper.
Empty the recovery tank.
Clean the filter.
blades
Replace or turn over the
squeegee rubber blades.
Fill the tank.
Open the tap
Clean the filter.
Call the technical support
service.
Use brushes or detergents
which are suitable for the
type of floor or dirt to be
cleaned.
Replace the brush.
Replace.
if
necessary