PULIZIA,
MANUTENZIONE
E RICAMBI
PRIMA DI QUALSIASI
OPERAZIONE DI PULIZIA
O MANUTENZIONE
TOGLIERE L'ALIMENTAZIONE
ELETTRICA
DALL'APPARECCHIO,
CHIUDERE LA VALVOLA
DI ALIMENTAZIONE
E ATTENDERE
CHE LA MACCHINA
SI SIA RAFFREDDATA.
Solo personale addetto alla
manutenzione, precedentemente
addestrato e qualificato può
eseguire le operazioni di
manutenzione dell'apparecchio.
MOTORE: Gli aerotermi circolari
montano dei motori di tipo chiuso
con cuscinetti autolubrificanti e
non richiedono alcun intervento
di manutenzione.
BATTERIA: Le batterie di
scambio termico debbono essere
mantenute in perfetto stato
per garantire le caratteristiche
tecniche di progetto. Controllare
ogni anno che il pacco alettato
non presenti ostruzioni al
passaggio dell'aria. Se necessario
pulire utilizzando un getto
d'aria, acqua o di vapore a
bassa pressione, avendo cura
di proteggere il motore elettrico,
per evitare danneggiamenti.
ELETTROVENTILATORE:
Nel caso vengano avvertiti rumori
o vibrazioni del ventilatore, verifi-
care il serraggio dei bulloni di
fissaggio della ventola al motore.
26
CLEANING,
MAINTENANCE
AND SPARE PARTS
BEFORE PERFORMING
ANY CLEANING
OR MAINTENANCE
PLEASE
DETACH THE APPLIANCE
FROM
THE POWER SUPPLY.
Only qualified and previously
trained technical personnel is
authorized to intervene on the
appliance for maintenance
operations.
MOTOR: The electric mount
closed motors with self lubricating
ball bearings. For this reason
they are maintenance-free.
BATTERY: The heat exchanger have
to be kept in a perfectly functional
state in order to maintain the
projected technical characteristics.
Once a year you should control if
the finned pack does not present
any obstructions at the air passage.
If necessary it has to be cleaned
with a jet of water or low-pressure
steam making sure that the motor
is protected against damages.
ELECTRIC VENTILATOR:
If the ventilator causes noise or
vibrations, the tightening of the
bolts, which connect the fan with the
motor, has to be controlled. Please
periodically control the tighteness
of the screws, which connect the
basket-like support with the motor.