Varying The Image Color Tone (White Balance Control) - Olympus CAMEDIA C-1 Manual Básico

22
í
Varying the Image Color Tone
This camera incorporates electronic circuitry to automatically adjust color hues so that they look natural
(auto white balance control circuit). If auto white balance control does not produce accurate results due to
weather or illumination, you can control the white balance manually.
Operating Procedure
1.
Check that the lens barrier is open.
2.
Press the
¼ The monitor shows the shooting mode
menu 1/3.
3.
Press the
display the shooting mode menu 2/3.
and then select
4.
Select one of the white balance control
modes listed below by pressing the
key.
5.
Press the
¼ The camera returns to the shooting mode and the
monitor shows the white balance setting.
6.
Press the shutter button.
¼ Images can be shot successively while maintaining the
selected white balance setting.
7.
Close the lens barrier to turn the camera off.
¼ The white balance setting is restored to AUTO.
White Balance Settings
AUTO
Clear Sky
Cloudy Sky
Incandescent
Lamp
Fluorescent
Lamp
OK/menu button.
or arrow pad key to
.
OK/menu button.
This is the default setting, which is not displayed
on the monitor.The white balance is controlled
automatically so that colors look natural.
The white balance is controlled so that colors
look natural in outdoors under a clear sky.
The white balance is controlled so that colors
look natural in outdoors under a cloudy sky.
The white balance is controlled so that colors
look natural under incandescent lighting.
The white balance is controlled so that colors look
natural under fluorescent lighting.
(White Balance Control)
OK/menu button
Arrow pad
or arrow pad
1 /3
AUTO
OFF
OFF
OFF
SELECT END
OK
Shooting mode menu 1/3 screen
2 /3
HQ
AUTO
ON
SELECT END
Shooting mode menu 2/3 screen
2 /3
HQ
ON
SELECT END
Shooting mode menu 2/3 screen
White balance setting
SHQ
OK
OK