Mestra R-100191 Manual De Instrucciones página 15

* The time setting for power of 60 Hz (the water
temperature is between 10 y 20 ºC) is listed as
below:
Alginate cups
1
2
3
! IMPORTANT
1. The mixing time shall adopt in average.
If there is any difference between water
temperature established by the supplier
of alginate impression material, the
setting time will be different.
2. Please set on the proper mixing time.
MAINTENANCE
1. Before cleaning or maintenance, disconnec
the unit.
2. Do not clean the unit while running or hot.
3. Mixing bowl:
After setting,
material inside the bowl can be cleaned and
removed easily.
The small hole at the center of cap shall be
cleaned very often (Fig. 13).
! IMPORTANT
1. The small hole at the center of cap shall
be celaned very often. If jam, the cover
will be very hard to open or close.
2. The water remained in the bowl after
cleaning shall be removed completely.
Otherwise it will cause error calculation
to next use.
Mixing time (seg.)
6 - 9
7 - 10
8 - 11
the remains impresion
Fig. 13
4. Cleaning:
If there is any dirt on the mixer, please use
cloth to wipe. If it is serious, then please
use a neutral cleaning agent.
Clean the unit at least once a week.
ATENTION:
Never use solvent or volatile oil to swipe for
cleaning, that will cause surface faded.
English
15