16 • ENGLISH
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials. Local regulations may provide for
separate collection of electrical products from the
household, at municipal waste sites or by the
retailer when you purchase a new product.
BATTERIES
At the end of their useful life, discard batteries
with due care for our environment:
f Do not short-circuit the battery terminals.
f Do not dispose of the battery(s) in a fire as this may
result in a risk of personal injury or an explosion.
f Run the battery down completely, then remove it from
the tool.
f Batteries are recyclable. Place the battery(s) in a
suitable packaging to ensure that the terminals cannot
be short-circuited. Take them to any authorised repair
agent or a local recycling station.
PROBLEM
Inflator will not operate
SERVICE INFORMATION
BLACK+DECKER offers a full network of company-owned and authorized service locations. All BLACK+DECKER
Service Centers are staffed with trained personnel to provide customers with efficient and reliable power tool service.
For more information about our authorized service centers and if you need technical advice, repair, or genuine factory
replacement parts, contact the BLACK+DECKER location nearest you, or visit us at www.BlackandDecker-la.com
SPECIFICATIONS
Input voltage
Input current
Pressure (max)
Weight
TROUBLESHOOTING
POSSIBLE CAUSE
12 Volt adaptor not connected
Accessory socket not live
No preset valve set
The fuse in the 12 Volt adaptor is blown
Cord or switch is damaged.
ASI200
12 Vdc
8 A
120/8.27 psi/bar
1.12 Kg
POSSIBLE SOLUTION
Connect the 12 Volt adaptor
Turn key to accessory position
Set preset value
Replace the fuse with one of the same
size and type (8A/250V)
Have the cord or switch replaced at a
BLACK+DECKER Service Centre or
Authorized Service Centre.