Technical Specifications; Disposal; Replacement Parts And Wearing Parts - Beurer IL 50 Instrucciones Para El Uso

3. Place the body so that the front ofthe glass ce-
ramic plate is lying on the flat surface.
4. Take the cool lamp by the left or right end and press
it carefully to the right or left.
5. Now lift it forwards and out of the socket.
Note
Use a cloth to hold the new lamp when inserting it,
not bare fingers, as the grease on your skin could
damage the coating on the lamp.
6. Insert the new lamp in the socket. The new lamp is
inserted in the reverse order to removal.
7. Close the unit again. The unit is closed in the reverse
order to opening it.
Make sure that no foreign objects are left in the
body of the unit and that nocables become trapped.
Storage
Remove the mains plug and let the unit cool down
completely before you move it.
If possible, store the infrared radiant heater in its origi-
nal packaging in a dry place.

7. Technical specifications

Mains connec-
tion AC 220 V – 240 V / 50 – 60 Hz
Power con-
sumption 300 W
Timer Adjustable from 1 to 15 minutes in
one-minute steps.
Dimensions
(WxHxD) 270 x 285 x 195 mm
Weight Approx. 1.5 kg
Operating Temperature: 10 °C to 35 °C
conditions (50 °F to 95 °F)
Relative humidity: ≤ 90 %
Storage and Temperature: -10 °C to 50 °C
transport: (14 °F to 122 °F)
Relative humidity: ≤ 90 %
Protection
class II
We retain the right to make technical modifications to
improve and further develop the product. For manufac-
turing reasons, the colour of the glass may change dur-
ing operation but this does not affect the performance
or quality of the unit.

8. Disposal

For environmental reasons, do not dispose of the de-
vice in the household waste at the end of its useful life.
Dispose of the unit at a suitable local collec-
tion or recycling point. Dispose of the device in
accordance with EC Directive – WEEE (Waste
Electrical and Electronic Equipment). If you have any
questions, please contact the local authorities respon-
sible for waste disposal.
This equipment complies with European standard
EN 60601-1-2 and is subject to specific safety provi-
sions for electromagnetic compatibility. Please note,
however, that portable and mobile HF communication
equipment may influence this unit. More details can be
requested from the stated Customer Service address
or found at the end of the instructions for use.
9. Replacement parts and wearing
parts
Replacement parts and wearing parts are availa-
ble from the corresponding listed service address
under the stated material number.
Designation
Replacement lamp
Type: Halogen lamp
220 - 240V / 300 W
118 mm long for R7S socket
12
Item number and/
or order number
162.620