Noise Information; Vibration Information - Worx LithiumDriveT WX251 Traducción De Las Instrucciones Originales

noise infoRMaTion

A weighted sound pressure L
A weighted sound power L
K & K
PA WA
Wear ear protection when sound pressure is over

ViBRaTion infoRMaTion

Vibration total values (triax vector sum) determined according to EN 60745:
Typical weighted vibration
warning: The vibration emission value during actual use of the power tool can differ from the
declared value depending on the ways in which the tool is used dependant on the following
examples and other variations on how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained.
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed.
warning: To be accurate, an estimation of exposure level in the actual conditions of use should
also take account of all parts of the operating cycle such as the times when the tool is switched off
and when it is running idle but not actually doing the job. This may significantly reduce the exposure
pA
wA
Vibration emission value a
Uncertainty K = 1.5m/s²
64dB(A)
75dB(A)
3.0dB(A)
80dB(A)
= 0.63m/s²
h
5 5