Facom BAT.TEST Manual Del Usuario página 8

START-STOP BATTERY TEST
1. Press the key to select START-STOP
Test. In this stage, you will find 3 tests for selection.
START-STOP TEST
BATTERY TEST
SYSTEM TEST
2. Press the key to select battery type
a. EFB
b. AGM FLAT PLATE
Press «ENTER» to confirm choice.
3. Press the key to select battery rating:
SAE (CCA), EN, IEC or DIN. Press «ENTER»
to confirm choice.
4. Press the key to input the battery capacity:
SAE (CCA) 40~2,000
EN 40~2,100
DIN 25~1,300
IEC 30~1,500
Press «ENTER» to begin test.
5. Press the key to confirm the position of
the battery if the surface charge is detected.
Follow the tester 's steps to remove the surface
charge if it happens.
6. Testing battery.
- 6 -
START-STOP
TEST
BATTERY TYPE
EFB
SELECT RATING
SAE
SET CAPACITY
XXXX SAE
TEST IN VEHICLE?
NO
TESTING