Facom BAT.TEST Manual Del Usuario página 12

NOTE that there might be some messages displayed to different
circumstances as below.
LOAD ERROR
The tested battery is bigger than 2000SAE (CCA).
Or the connection is not properly established. Check the capacity of
the battery & make sure the clamp lead is properly connected.
24V SYSTEM PRINTING
To print 24V system test result, user must save the
test result first. The test result will be recorded until you connect to
12V battery. The message to check printout will be displayed after you
reconnect to battery.
- 10 -
LOAD ERROR
PRINT 24V SYSTEM
RESULT? YES