Pole Attachment - Trueshopping MT260 Manual Del Usuario

•
Place part 1 onto the mounting and line
the holes up with the holes on part 2.
Then fix the four Allen bolts through the
top of part 1 to fix in place.

Pole Attachment

To attach the different attachments to the
machine, you need to connect them to the
coupling on the end of the fixed engine pole.
1. Open the coupling and turn the retaining
handle to loosen the connection.
2. Line up the hole on the required tool
pole as shown below and push firmly
into the coupling.
3. Close the coupling again, tighten the
retaining handle, and pull and twist
the pole to ensure that it is secure.
8