7. Fuel tank
8. Throttle trigger
9. Shoulder Harness
10. Unit attachment locking screw
The Engine
1. Filler cap
2. Choke lever: Facilitates the engine
starting.
3. Fuel Pump: increases fuel supply
when cold starting.
4. Carburettor screw: For adjusting the
idling speed.
5. Engine support : For supporting the
machine when on the ground
6. Fuel tank: For storing a fuel mixture
comprising of petrol and engine oil.
7. Exhaust (with spark arrestor):
Reduces operating noise and directs
the exhaust gas away from the
operator.
Attaching the handle
•
The handle fits over the plastic mounting
bracket which is already attached to the
upper pole.
•
The handle consists of two parts ( 1 & 2 )
1
•
Place part 2 onto the underside of the
mounting bracket and hold it in place with
your hand. Push four hex nuts into the
recesses beneath part two and hold them
in place with your fingers.
7
2