•
Replace the damaged or worn chain
only with parts specified by the
manufacturer.
The trimmer / brush cutter
Maintaining the bevel gear
The bevel gear is filled with grease.
Check and refill this regularly using
machine grease –
•
Loosen the screw with the 5mm Hex key
(41) and remove it and the washer
underneath.
•
Add suitable lubricant
•
Refit the screw and washer.
•
Clean grass off the trimmer head /
guard and brush cutter after use.
The Hedge trimmer
•
Clean the blades after every use as
dried cuttings can impair operation.
•
Check for damage before each use.
FAULT FINDING
31