IMPORTANT SAFETY INFORMATION
Please note that the cutting blade
•
continues to run for a short period
after you let go of the throttle trigger
– This is called the flywheel effect.
•
Do not lend or rent your power tool
without the instruction manual. Be
sure that anyone using your power
tool understands the information
contained in this manual.
•
Persons with pacemakers only: The
ignition system of your power tool
produces an electromagnetic field of a
very low intensity. This field may
interfere with some pacemakers.
Consult your doctor if you have
concerns.
•
Do not use a pressure washer to clean
your power tool. The solid jet of water
may damage parts of the power tool.
•
Do not spray the machine with water.
Work calmly and carefully – in
•
daylight conditions and only when
visibility is good. Stay alert so as not
to endanger others.
Your power tool produces toxic
•
exhaust fumes as soon as the engine
is running. These fumes may be
colourless and odourless and contain
unburned hydrocarbons and benzoyl.
Never run the engine indoors or in
poorly ventilated locations.
•
The dusts, vapour and smoke
produced during operation may be
dangerous to health. If the work area
is very dusty or smoky, wear
appropriate safety equipment.
If your power tool is subjected to
•
unusually high loads for which it was
not designed (e.g. heavy impact or a
fall), always check that it is in good
condition before continuing work
When working at heights:
•
TUV IDENTIFICATION
LABEL
Attachment information
– Always use a lift bucket
– Never work on a ladder or in a tree
– Never work on an insecure support
– Never operate your power tool with
one hand.
Be alert and cautious when wearing hearing
protection, your ability to hear warnings
(alarms, etc.) is restricted.
b.