Refilling The Trimmer Head - Trueshopping MT260 Manual Del Usuario

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 146
Using the provided spanner loosen the
cable retaining nut and the cable will fully
detach from the carb.
The carburettor is now detached.
*If replacing with a fresh carburettor,
please follow the instruction in reverse
to fit.
*If inspecting only, check that no debris
is evident and that the rubber gasket on
the carburettor is not damaged or mis -
shapen.

Refilling the trimmer head

When the trimmer cord eventually runs out,
please follow this guide for refilling the
bump head with fresh trimmer cord.
Remove the trimmer head from the multi
tool.
Looking at the side of the head, line up
the two points (circled) by holding the
lower and upper sections of the head with
your hands and twisting, this will release
the lower part of the head.
28
Tabla de contenido
loading

Tabla de contenido