Tensioning The Chain; Filling With Oil; Operation Advice - Trueshopping MT260 Manual Del Usuario

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 146
Place the plastic cover onto the
assembly and loosely screw the
nut on. (DO NOT TIGHTEN)
Turn the tightening screw
(Circled) clockwise until the chain
on the underside of the rail is
slightly hung up and the links are
located into the groove of the
guide rail.
Refit the chain guard and tighten
the nut by hand.

Tensioning the chain

A new chain has to be tensioned
frequently remember to check the
chain tension regularly.
To do this –
1. Stop the engine and loosen the
guard nut.
2. Keep the guide rail tip pointing
upwards.
3. Use a screwdriver to tighten the
clamping screw clockwise until the
chain once again rises tightly against
the underside of the rail.
4. Retighten the nut.
To fill the chain pruner with oil.
Remove the black plastic cap on
the chain pruner by turning it anti
clockwise.
Fill with oil and then replace the
cap.

Operation advice

Beware of falling branches and
branches that many spring back
You must use the extension to get
to hard to reach areas, do not
lean.
Do not use the pruning saw while
standing on a ladder, ensure you
have firm footing at all times.
18

Filling with oil

Tabla de contenido
loading

Tabla de contenido