Mounting The External Module; Electrical Installation; External Module Wiring - SOMFY VSYSTEMPRO Manual De Instalación

3 MOUNTING THE EXTERNAL MODULE

The external module can be mounted on the surface of a wall or recessed into the wall or
post next to the entry to the property. It may be equipped with a visor to protect against
adverse weather (see 2.3 Dimensions of the external module, page 4)
For mounting, refer to the relevant mounting instructions.
The electrical power supply must be installed with the power switched off. It must comply
with the applicable standards in the countries in which the product is installed and
installed by a qualified person.

4.1 External module wiring

[1]. A er preparing the external module support, set out the wiring according to the
installation.
[2]. Configure the switch (see 5 - Configuring the external module, page 8).
[3]. Switch the power supply back on.
[4]. Test the installation.
[5]. Place the frame back around on its mounting.
VID2
GND V
+V2
EB2
EB1
GND
BUS
BUS
PTE
GND
GND
NO
C
+ C
VAUX
NC

4 ELECTRICAL INSTALLATION

unused
unused
unused
unused
unused
unused
Bus input
"Press to exit" button
Common
NO relay (12-24 Vca/Vcc - 3 A max.)
Common relay
Pulse for latch with call memory
unused
NF relay (12-24 Vca/Vcc - 3 A max.)
Copyright © 2016 Somfy SAS. All rights
reserved.
EN
6