Checking Airflow Direction; Checking Fan Speed; Silent Key; Timer Setting - Olimpia splendid UNICO TWIN Serie Instrucciones Para El Uso Y El Mantenimiento

6.4.7 -

CHECKING AIRFLOW DIRECTION

• Press key B4 on the remote control to activate/deactivate the continuous oscillation of the moving air
outlet deflector (fig.A - ref. 1).
• When continuous oscillation is active, an additional press of the key B5 allows to lock the deflector so as
to obtain the desired vertical direction for the air flow.
The moving deflector position must never be forced manually.

6.4.8 - CHECKING FAN SPEED

• The fan speed check occurs through key B2 (on the remote control).
• Pressing several times this key will cause speed to change according to the following sequence:
low > medium > High > automatic.
• The higher the speed setting, the greater the output of the air conditioner but also the louder its operation.
• By setting the Automatic mode, the onboard microprocessor adjusts the automatic speed. the higher
the difference between the room temperature detected and the temperature set, the higher the speed.
• As the room temperature nears the setting, fan speed is reduced automatically.
• In dehumidification mode, it is not possible to control the speed as the appliance can only operate exclu-
sively at low speed.
If both units are in operation, UNICO MASTER and WAL ventilation is limited to low speed.

6.4.9 - SILENT KEY

• To activate this mode, press key B3 on the remote control.
• The activation of the function SILENT allows to obtain multiple results:
- gradual increase in the set temperature during cooling mode
- gradual decrease in the set temperature for heating (HP versions only)
- reduction of ventilation speed
• To activate the function SILENT, it is necessary to select the operating mode and the desired temperature
first, then press key B3 to activate it.

6.5 - TIMER SETTING

• The appliance logic allows the User to make use of two different timer programs (see paragraph 6.5.2),
thanks to which the appliance can be deactivated and activated (or vice versa) whenever desired (for
example, it can be activated shortly before returning home so as to find an already pleasant temperature
in the room).
• Firstly, if it is desired to make use of these functions, set the correct time (see paragraph 6.5.1) and then
set the timer as you prefer.
EN - 39
UNICO TWIN