Model Identification; Tool Operation Check - Stanley BOSTITCH 216 Serie Especificacion Técnicas

MODEL IDENTIFICATION

© Stanley Bostitch
Refer to Tool Operation Check on page 5 before proceeding to use this tool.
GB Not to be reproduced without permission. Unauthorised copies of this document do not constitute CE
Trigger Operated (Fig 4)
compliance for the products.
Identified by:
FR Reproduction interdite sans permission préalable. Les copies non autorisées de ce document ne signifient en •
No speed adjustment (a)
rien que les produits soient conformes aux normes CE.
•
No trigger free play adjustment
Note: All 216 models are fitted with a secondary trigger device; this reduces the possibility of the tool being
DE Vervielfältigung nicht ohne Genehmigung gestattet. Unzulässig erstellte Kopien dieses Dokuments erfüllen nicht
actuated un-intentionally.
die CE-Richtlinien für Produkte.
TRIGGER OPERATED (Fig 6)
NL Mag niet worden vermenigvuldigd zonder toestemming. Onrechtmatige kopieën van dit document willen niet
zeggen dat de producten voldoen aan de CE-vereisten.
The Trigger Operated model is cycled by actuation of the trigger.
Raise the secondary trigger device (6.1)
DK Må ikke gengives uden tilladelse. Uautoriserede kopier af dette dokument udgør ikke CE overholdelse for
Keeping the secondary trigger device pulled, activate the operating trigger (6.2) to fire a fastener.
produkterne.
Releasing the secondary safety trigger and the operating trigger simultaneously will automatically lockout the
operating trigger (6.3) preventing the tool from being actuated.
FI Ei saa jäljentää ilman lupaa. Tämän asiakirjan ilman valtuutusta tehdyt kopiot eivät muodosta tuotteille CE-
yhdenmukaisuutta.
Warning! While the secondary trigger device is pulled, the tool will fire a fastener each time the operating
trigger is activated.
GR Απαγορεύεται η αναπαραγωγή χωρίς προηγούμενη άδεια. Τα μη εξουσιοδοτημένα αντίγραφα του παρόντος
εγγράφου δεν αποτελούν συμμόρφωση CE για τα προϊόντα.
For maximum power: rotate valve anticlockwise as far as possible. (6.4)
To reduce power: rotate valve clockwise for up to 30% reduction.
IT Vietata la riproduzione senza permesso. Le copie non autorizzate di questo documento non garantiscono la
conformità CE per i relativi prodotti.
AUTOMATIC (Fig 6/7)
The automatic model is cycled by actuation of the trigger.
NO Skal ikke reproduseres uten tillatelse. Ikke godkjente kopier av dette dokumentet oppfyller ikke kravene for CE-
merking for produktet.
To actuate the tool: raise the secondary trigger device (6.1)
Keeping the secondary trigger device pulled, activate the operating trigger (6.2) to fire a fastener.
PT Reprodução proibida sem autorização prévia. As cópias não autorizadas deste documento não estão em
When the trigger is pulled lightly with a short motion the tool will drive one fastener. (7.1) When the trigger is
conformidade com a CE para os produtos.
pulled as far as possible the tool will continuously drive fasteners automatically until the trigger is released. (7.2)
The rate at which fasteners are driven in the automatic mode is adjustable. (7.3)
ES Prohibida la reproducción sin permiso. Las copias no autorizadas de este documento no suponen la
conformidad con las normas CE de los productos.
Releasing the secondary safety trigger and the operating trigger simultaneously, will automatically lockout the
operating trigger (6.3) preventing the tool from being actuated.
SE Prohibida la reproducción sin permiso. Las copias no autorizadas de este documento no suponen la
Warning! While the secondary trigger device is pulled, the tool will fire up to 30 times a second when the
conformidad con las normas CE de los productos.
trigger is activated in automatic mode.
PL Niniejszy dokument nie może być kopiowany bez pozwolenia. Nieautoryzowane kopie niniejszego dokumentu nie
The speed adjustment screw is located on the left side of the tool in the trigger valve area. (7.3) Turning the
stanowią deklaracji zgodności CE prezentowanych produktów.
screw in a counter clockwise direction increases speed and in a clockwise direction decreases speed. This
model also includes a trigger free play adjustment (7.4) to adjust the amount of trigger stroke between single and
CZ Niniejszy dokument nie może być kopiowany bez pozwolenia. Nieautoryzowane kopie niniejszego dokumentu nie
automatic operation.
stanowią deklaracji zgodności CE prezentowanych produktów.
For maximum power: rotate valve anticlockwise as far as possible. (6.4)
SK Rozmnožovanie bez povolenia je zakázané. Neoprávnené kópie tohto dokumentu nie sú v súlade s CE pre dané
To reduce power: rotate valve clockwise for up to 30% reduction.
výrobky.

TOOL OPERATION CHECK:

HU A dokumentum engedély nélkül nem sokszorosítható. Az engedély nélkül sokszorosított dokumentum nem jelenti
Warning! Remove all fasteners from tool before performing tool operation check.
a termék CE-megfelelőségét.
RO Reproducerea neautorizată este interzisă. Copiile neautorizate ale acestui document nu reprezintă
conformitatea CE pentru produse.
Automatic (Fig 5)
Identified by:
•
Speed Adjustment (a)
•
Trigger Free Play Adjustment (b)