Safety Clearances; Preparing The Units - Bosch HUI54451UC Instrucciones De Instalación

Safety clearances

Preparing the units

Fitted units must be heat-resistant up to 90 °C. The
stability of the fitted unit must also be guaranteed after
the cut-out work.
Make the cut-out according to the installation sketch.
After the cutting out work is complete, remove the
shavings.
The clearance between the shelf on the cooktop and the
bottom of the extractor hood may not be less than 24"
(610 mm) in the case of electric cooktops and 25
(650 mm) in case of gas or combined ranges.
If the installation instructions for the gas cooking
appliance specify a larger distance, this must be taken
into account.
Notes
Heed the clearance between the partition floor and the
▯
lower edge of the fitted unit; see drawing.
Use the included template to make the holes and the
▯
cut-outs.
/ "
3
5
9