Before First Use; Operation - Silvercrest STK 650 A2 Instrucciones De Uso

Before first use

■ Remove all packaging materials from the appliance .
■ Rinse out all parts of the brewing system (brewing chamber
q , sieve
Before first use, proceed as follows:
1) Remove the jug
2) Fill the jug
lemon juice concentrate) . If you have no lemon, you can add a teabag (or
a teaspoon of loose leaf tea) directly to the water .
3) Insert the brewing system into the jug
4) Close the lid
5) Switch the appliance on with the On/Off switch
and the On/Off switch
6) Switch off the appliance using the On/Off switch
ance as described in "Cleaning and care" .
The tea maker is now ready for use .

Operation

CAUTION! PROPERTY DAMAGE!
► Do not add any sugar to the tea maker . Do not heat any milk or alcohol in
the tea maker . This will irreparably damage the appliance .
NOTE
► Green tea is not suitable for brewing in the tea maker . The ideal brewing
temperature for green tea is around 70°C . At higher brewing temperatures,
such as those used by the tea maker, tannins are released . This makes the
tea taste bitter .
1) Remove the jug
2) Open the lid
on a level system .
3) Add the required amount of water to the jug
than the MAX marking or less than the MIN marking .
DANGER! ELECTRIC SHOCK!
► To prevent scalds and electric shocks, ensure that the water in the jug
never overflows .
■ 30
│
GB│MT
w ) and the jug 3 carefully (see section "Cleaning and care") .
3 from the base
3 up to the MAX mark and add a teaspoon of lemon juice (or
1 and place the jug
8 light up . Wait until the control lamp
3 from the base
1 and remove the brewing system . Place the brewing system
5 .
3
.
3 on the base 5 .
8 . The control lamp
8 and clean the appli-
5 .
3 . Never fill water to more
0 , riser pipe
4
4 goes off .
3
STK 650 A2