Items Supplied; How To Use; Before Using For The First Time; Using The Kettle - Silvercrest SWKE 3100 A1 Instrucciones De Servicio

Never put alcohol, sugar or milk into
the kettle!
Place the device on a stable, flat sur-
face.
Do not use any astringent or abrasive
cleaning agents.

4. Items supplied

1 Kettle 2
1 Device base 4
1 Set of operating instructions

5. How to use

DANGER! Risk of electric
shock!
Connect the mains plug only to a cor-
rectly installed, easily accessible
earthed wall socket with voltage corre-
sponding to the rating plate. The wall
socket must continue to be easily acces-
sible after the device is plugged in.
Pull the mains plug 5 out from the wall
socket after every use.
• Remove all packing material.
• Check to ensure that all parts are pres-
ent and undamaged.
• Place the device on a dry, level, non-slip
surface.
6. Before using for the
first time
1. Fill the kettle 2 up to the marking
MAX 1.7L on the water level display 3
and heat the water (see "Using the kettle"
on page 40).
2. Pour the water out and rinse out the ket-
tle 2 with fresh water.
3. Repeat this process. Then it is safe to
use the device.
40 GB

7. Using the kettle

DANGER! Risk of injury
through scalding!
It is always necessary to close the lid 9
when heating water, as boiling water
may otherwise spray out!
Do not open the lid 9 while the water is
boiling.
Fill the kettle 2 only to the maximum fill-
ing level (MAX 1.7L), as boiling water
may otherwise spray out.
Do not bend over the kettle 2 when you
open the lid 9 and the contents are still
hot. There is a danger of being scalded
by escaping steam.
The kettle 2 becomes very hot during
operation. Only touch it at its handle 7
and only use the release button 8 and
the on/off switch 6.
WARNING! Risk of material damage!
Fill the device with a minimum of 0.7 li-
tres of water, as otherwise the device
may overheat.
Never put alcohol, sugar or milk into
the kettle 2!
Water as foodstuff
Water is a very sensitive foodstuff and can go
bad due to germs forming. Please take note:
• Always use fresh drinking water in the
kettle 2.
• Pour water away, which has been
standing in the kettle 2 for longer than
approx. 1 hour.
• Do not reboil cooled down water.
Boiling water
1. Remove the kettle 2 from the device
base 4.
2. Press the release button 8 to open the
lid 9.