KENMORE ELITE 795.7132 Serie Manual De Uso página 12

REFRIGERATOR INSTALLATION
NOTE: Removing the doors is always recommended when it is necessary to move the refrigerator through a narrow
opening. If it is necessary to remove the handles, follow the directions below.
HOW TO REMOVE/REPLACE FREEZER
DOOR HANDLE
NOTE: Handle appearance may vary from illustrations on
this page.
To remove, loosen the set screws located on the
lower side of the handle with a 1/8 in. Allen wrench
and remove the handle.
To replace, place the handle on the door by fitting
the handle footprints over the mounting fasteners and
tightening the set screw with a 1/8 in. Allen wrench.
NOTE: If the handle mounting fasteners need to be
tightened or removed, use a ¼ in. Allen wrench.
12