During Operation; Maintenance - STERWINS 900 JET AUTO-3 Características

6. OPERATION

During operation

The motor is protected against overheating by an integrated thermostat. In the even
of overheating, the thermostat will automatically switch off the pump. The pump
automa
Depending on the suction height and the amount of air in the intake line, priming can tak
anywhere between 1 to 5 minutes. If it takes longer than this, the pump should be r
water Always remove the plug from the socket before refilling!
T
After a loss of pressure due to water consumption, the pump will switch on again automa
(cut- ressur
If at any time after use the pump to be removed, it must always be refilled with wat
whenev

7. MAINTENANCE

DANGER! Risk of injury due to electric shock.
Warning! Always remove the plug from the socket before servicing
Servicing
If the pump becomes clogged, connect the discharge line to the water line and disconnec
the suction hose. Open the water line then switch on the pump several times for approx. tw
seconds. T
Storage
O wat
Stor
After long periods of stoppage make sure the rotor turns correctly by briefly switching
EN
20151209 SPECIFICATIONS 1300 JET AUTO 5I-3.indd 128
restar ft c own.
t cut-
ro Bar)
ower
torage.
v relat
r r t
4
a rotect r
ff.
ressur B reached
roblems.
complet o
rost
128
t ry.
09/12/15 14:41