Miniman - PLYMOVENT MINIMAN-75 Instrucciones Para El Uso

MiniMan

a. if the inner arm seems to be too weak or too strong:
check that the arm is correctly assembled on the
1.
wall. also check that the wall bracket is level.
Check and adjust the friction joints marked A on
2.
the figure.
b. if the outer arm will not stay in the required position:
check that the arm is correctly assembled. also
1.
check that the wall bracket is level.
Check and adjust the friction joints marked B on
2.
the figure.
a
051113/0 MiniMan-75
Maintenance instruction
© Copyright 2008: All rights reserved. All information within this printed matter may not be reproduced,
handed over, copied, xeroxed or translated into another language in any form or means without written
permission from Plymovent AB. Plymovent AB reserves the right to make design changes.
a
b
bsab no: t0.31
ser. no: MMa/ds
date: aug-00
replace:
b
MiniMan/75/usa/can/12/14
EN - 11