Safety Instructions - IKEA LAGAN Manual De Usuario

Ocultar thumbs Ver también para LAGAN:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

ENGLISH
as fruits and beverage. It enjoys the advantages of small
size, light weight, low electric consumption and easy use.
• Keep ventilation openings, in the appliance enclosure or
in the built-in structure, clear of obstruction.
• Do not use mechanical devices or other means to
accelerate the defrosting process, other than those
recommended by the manufacturer.
• Do not damage the refrigerant circuit.
• Do not use electrical appliances inside the food storage
• compartments of the appliance, unless they are of the
type recommended by the manufacturer.
• Do not use water spray and steam to clean the appliance.
• Clean the appliance with a moist soft cloth. Only use
neutral detergents. Do not use abrasive products,
abrasive cleaning pads, solvents or metal objects.
• Do not store explosive substances such as aerosol cans
with a flammable propellant in this appliance.
• If the supply cord is damaged, it must be replaced
by the manufacturer, its Authorised Service Centre or
similarly qualified persons in order to avoid a hazard.
Safety instruction
Installation
Remove all the packaging.
Do not install or use a damaged appliance.
Do not tilt the refrigerator for more than
45° form upright during moving it
Obey the installation instruction supplied
with the appliance.
Always be careful when you move the
appliance because it is heavy. Always
wear safety gloves.
Make sure the air can circulate around
the appliance.
Wait at least 4 hours before connecting
the appliance to the power supply.
This is to allow the oil to flow back in
the compressor. This is needed also
when performing door reversibility and
appliance is lying down
Do not install the appliance close to
radiators or cookers, oven or hobs.
The rear of the appliance must stand
against the wall.
Do not install the appliance where there
is direct sunlight.
Do not install this appliance in areas that
are too humid or too colds, such as the
construction appendices, garages or wine
cellars.
When you move the appliance, lift it by the
front edge to avoid scratching the floor.
Electrical connection
Warning! Risk of fire and electrical shock.
The appliance must be earthed.
All electrical connections should be made
by a qualified electrician.
Make sure that the electrical information
on the rating plate agrees with the power
supply. If not, contact an electrician.
Always use a correctly installed
shockproof socket.
Do not use multi-plug adapters and
extension cables.
Make sure not to cause damage to the
electrical components (e.g. mains plug,
mains cable, compressor). Contact the
Authorised Service Centre or an electrician
5
Tabla de contenido
loading

Este manual también es adecuado para:

Tillreda

Tabla de contenido