HumanTechnik Lisa Instrucciones De Servicio página 8

Connecting two recharging
bases with each other
Bridge-
element
1. Unplug the two recharging bases.
2. Detach a bridge element from the
bottom of one of the bases.
3. On the first recharging base,
remove one of the plastic covers
over the slot for the bridge ele-
ment. Insert the bridge element
into the slot.
4. Screw the safety screw into the
bridge element through the bot-
tom of the base.
5. Remove the opposite plastic cover
on the second recharging base.
6. Set the second recharging base
on the bridge element protruding
out of the first recharging base.
7. Push the second recharging base
over until it is flush with the first
one.
8. Screw the safety screw into the
bridge element through the bot-
tom of the second recharging
base.
8 English
9. Plug in one of the recharging
bases into a power outlet by
inserting the round plug into the
DC jack on the back of the
recharging base.
Use only one power cord to plug
in the two recharging bases!
Maintenance and care
All lisa devices are maintenance-
free. If the unit does become dirty,
simply wipe it clean with a soft, damp
cloth. Never use spirits, thinners or
other organic solvents.
Please do not expose lisa devices to
direct sunlight for a long time and
please protect them from excessive
heat, moisture and severe mechani-
cal shocks.
Note: This product is not protected
against splash water. Do not place
any containers filled with water,
such as flower vases, or anything
with an open flame, such as a lit
candle, on or near the product.