Technical Specifications; Am10 - Bose ArenaMatch DeltaQ Guia De Instalacion

PRO.BOSE.COM

Technical Specifications

AM10

Single Module Performance
Frequency Response (–3 dB)
Frequency Range (–10 dB)
Nominal Coverage Pattern (H × V)
Recommended High-pass Filter
Crossover
70V/100V transformer tap settings
Power Handling, long-term continuous
Power Handling, peak
Sensitivity (SPL / 1W @ 1 m)
Calculated max. SPL @ 1 m (Bose power test)
Calculated max. SPL @ 1 m (2-hour power test)
Calculated max. SPL @ 1 m (Bose power test), peak
Calculated max. SPL @ 1 m (2-hour power test), peak
Transducers
Low Frequency
High Frequency
Nominal Impedance
Physical
Enclosure Material
Finish
Grille
Environmental
Connectors
Suspension/Mounting
Dimensions (H × W × D) – millimeters
Dimensions (H × W × D) – inches
Net Weight
Shipping Weight
Accessories
Footnotes
1. Frequency response and range measured on-axis in anechoic environment with recommended bandpass and EQ.
2. Bose extended-lifecycle test using pink noise filtered to meet IEC268-5, 6-dB crest factor, 500-hour duration.
3. AES standard 2-hour duration with IEC system noise.
4. Sensitivity measured in anechoic environment with recommended bandpass and EQ.
5. Maximum SPL calculated using sensitivity and power ratings, exclusive of power compression.
Installation Guide • ArenaMatch DeltaQ Array Loudspeaker
65 Hz to 15 kHz
1
55 Hz to 17 kHz
60° × 10° (AM10/60) or 80° × 10° (AM10/80) or 100° × 10° (AM10/100)
60 Hz with minimum 12 dB / octave
950 Hz internal passive or external bi-amp (Bose ControlSpace presets)
70V: 100W, 200W, 400W; 100V: 200W, 400W
Bose Extended Lifecycle Test
LF (bi-amp)
600 W
2400 W
LF
96 dB
4
124 dB
5
125 dB
130 dB
131 dB
1 × Bose LF14 neodymium 14-inch woofer (4-inch voice coil)
6 × Bose EMB2S titanium-diaphragm, neodymium compression drivers (2-inch voice coil)
Passive: 8 Ω / Bi-amp: 8 Ω + 8 Ω
Exterior-grade birch plywood
Two-part polyurethane coating, black
Powder-coated perforated stainless steel, acoustic foam, stainless steel mesh
Rated for direct-exposure outdoor installations (IEC 60529: IP55)
Barrier strips: passive in/through, bi-amp, and 70V/100V, with cover
8 × M12 threaded inserts (4 per side); 2 × M10 threaded inserts (1 per side); 2 × M6
threaded inserts (1 per side); 1 × M10 threaded insert, rear safety connection
409 × 783 × 420
16.1 × 30.8 × 16.5
36.3 kg (80 lbs)
43.5 kg (96 lbs)
U-bracket, array suspension kits, waveguide kits
2
HF (bi-amp) Passive
150 W 750 W
600 W 3000 W
AM10/60
HF Passive LF
106 dB 99 dB 96 dB
128 dB 128 dB 124 dB
129 dB 129 dB 125 dB
134 dB 134 dB 130 dB
135 dB 135 dB 131 dB
Technical Specifications
AES Transducer Test
LF (bi-amp) HF (bi-amp)
750 W 200 W
3000 W 800 W
AM10/80
HF Passive LF
105 dB 98 dB 96 dB
127 dB 127 dB 124 dB
128 dB 128 dB 125 dB
133 dB 133 dB 130 dB
134 dB 134 dB 131 dB
3
Passive
900 W
3600 W
AM10/100
HF Passive
104 dB 97 dB
126 dB 126 dB
127 dB 127 dB
132 dB 132 dB
133 dB 133 dB
English • 19