Daily Use; The Heat Setting; Using The Cooking Zones; Bridge Function - Electrolux EHO6832FOG Manual De Instrucciones

Ocultar thumbs Ver también para EHO6832FOG:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

4. DAILY USE

WARNING!
Refer to Safety chapters.
4.1 Activating and deactivating
Touch
deactivate the hob.
4.2 Automatic Switch Off
The function deactivates the hob
automatically if:
• all cooking zones are deactivated,
• you do not set the heat setting after
you activate the hob,
• you spill something or put something
on the control panel for more than 10
seconds (a pan, a cloth, etc.). An
acoustic signal sounds and the hob
deactivates. Remove the object or
clean the control panel.
• the hob gets too hot (e.g. when a
saucepan boils dry). Let the cooking
zone cool down before you use the
hob again.
• you use incorrect cookware. The
symbol ? comes on and the cooking
zone deactivates automatically after 2
minutes.
• you do not deactivate a cooking zone
or change the heat setting. After some
time, the hob deactivates.
The relation between the heat setting
and the time after which the hob
deactivates:
Heat setting
1 - 3
4 - 7
8 - 9
10 - 14

4.3 Selecting language

To change the language, start the hob
with
and then touch
language menu with arrows. Touch
for 1 second to activate or
The hob deacti‐
vates after
6 hours
5 hours
4 hours
1.5 hour
. Set the
to confirm. The display shows the list of
languages. Touch
language. Touch

4.4 The heat setting

To set or change the heat setting:
Touch the control bar at the correct heat
setting or move your finger along the
control bar until you reach the correct
heat setting.

4.5 Using the cooking zones

Put the cookware on the cross / square
which is on the surface that you cook.
Cover the cross / square fully. Induction
cooking zones adapt to the dimension of
the bottom of the cookware
automatically. You can cook with the
large cookware on two cooking zones at
the same time.

4.6 Bridge function

This function connects two left side
cooking zones and they operate as one.
First set the heat setting for one of the
left side cooking zones.
To activate the function: touch
set or change the heat setting touch one
of the control sensors.
To deactivate the function: touch
The cooking zones operate
independently.
When you use only one cooking zone of
the pair we recommend that you use the
ENGLISH
9
or
to set the
to confirm.
. To
.
Tabla de contenido
loading

Tabla de contenido