GYS NOMAD POWER PRO 700 Manual Del Usuario página 9

Translation of the original instructions
NOMAD POWER PRO 700
Connection / disconnection:
• Disconnect the power supply before connecting/disconnecting the
device to/from the battery.
Class II device (charger booster)
Class III device (booster)
Maintenance:
• The power supply cable cannot be replaced. If the cable is
damaged,the device should not be used (charger booster).
• Service should be performed by a qualified person
• Warning! Always remove the power plug from the wall socket before
carrying out any work on the device.
• Under no circumstances should solvents or other aggressive cleaning
agents be used.
• Clean the device's surfaces with a soft, dry cloth.
Regulations :
• The device complies with European Directive.
• The certificate of compliance is available on our website.
• EAC conformity mark (Eurasian Economic Commission)
• Equipment in compliance with British requirements. The British
Declaration of Conformity is available on our website (see home
page).
• Equipment in conformity with Moroccan standards.
• The declaration C‫( م‬CMIM) of conformity is available on our
website (see cover page).
Disposal:
• This product should be disposed of at an appropriate recycling facility.
Do not dispose of in domestic waste.
• The battery must be removed from the device before the latter is
discarded.
• The device must absolutely be disconnected from the power supply
network before removing the battery.
• Product contains lithium based battery, at end of product life dispose
of product according to local regulation.
EN
9