Troubleshooting - Worx WX252 Manual Original

TROUBLE SHOOTING
Problem
Battery will not charge
Switch cannot be pressed
XTD Driver stops during driving
screws
Possible cause
1. Charger not plugged into a work-
ing outlet.
2. Surrounding air temperature is
too hot or too cold
Forward/Reverse switch at middle
position
XTD Driver battery is out of power
Solution
1. Plug charger into a working
outlet. Check current by plugging
in a lamp.
2. Move charger to an appropriate
place which temperature is suitable
for the charger.
Make sure switch is on Forward
or Reverse rotation according to
project need.
Make sure XTD Driver is fully
charged before using it.
13