Ec Declaration Of Conformity - Optimus OPTIgrind GQ-DI3 Manuel De Instrucciones

OPTIMUM
M A S C H I N E N - G E R M A N Y
5.6 EC - Declaration of Conformity
Machinery Directive 2006/42/EC Annex II 1.A
The manufacturer /
retailer:
hereby declares that the following product,
Product designation:
Type designation:
Serial number:
Year of construction:
Drill bit grinder for sharpening of twist drills up to 13mm, which meets all the relevant provisions of the
above mentioned Directive 2006/42/EC as well as the other directives applied (below) including at the time
this statement applicable changes.
The following other EC Directives were applied:
EMC Directive 2004/108/EC
Low Voltage Directive 2006/95/EC
RoHS Directive 2011/65/EC
The safety objective meet the requirement of EC Directive 2006/95/EC
The following harmonized standards were applied:
EN 55014-1:2006 Electromagnetic compatibility - Requirements for household appliances, electric tools and
similar apparatus - Part 1: Emission (CISPR 14-1:2005)
EN 55014-2:1997/A1:2001 Electromagnetic compatibility - Requirements for household appliances, electric
tools and similar apparatus - Part 2: Immunity - Product family standard (CISPR 14-2:1997/A1:2001)
EN 60204-1:2006/A1:2009 Safety of machinery - Electrical equipment of machines - Part 1: General
requirements (IEC 60204-1:2005/A1:2008)
EN 60204-1:2006/AC: 2010 Safety of machinery - Electrical equipment of machines - Part 1: General
requirements (IEC 60204-1:2005 (modified))
EN 61029-2-4:2011 Safety of transportable motor-operated electric tools - Part 2-4: Particular requirements
for bench grinders (IEC 61029-2-4:1993, modified + A1:2001, modified)
EN ISO 12100:2010 Safety of machinery - General principles for design - Risk assessment and risk reduc-
tion (ISO 12100:2010)
EN 50581:2012 Technical documentation for the assessment of electrical and electronic products with
respect to the restriction of hazardous substances
Person responsible for the document: Kilian Stürmer, Phone: +49 (0) 951 - 96555 - 800
Address:
Kilian Stürmer
(CEO / Managing director)
Hallstadt, 2013-12-12
GB GQ-D13
14
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26
D - 96103 Hallstadt
Drill bit grinder
GQ-D13
_ __ __ __ __
20__
Dr.-Robert-Pfleger-Str. 26
D - 96103 Hallstadt
Original operating instructions Version 1.0.1 2014-07-10