Kenmore 415.23667310 Manual De Uso Y Cuidado página 25

Remove the two factory-attached screws and washers from the side burner valve bracket (A).
10
Use the same screws and washers to attach the side burner bezel and valve bracket to the side
shelf fascia (A). Press side burner control knob onto valve stem (A).
Place side burner into shelf (B). Fit burner tube over valve (C). Fit stud on burner bottom into
small hole in burner drip pan (B). Under drip pan, secure stud with wing nut (C).
Make sure valve is secure within burner tube. Hook venturi clip to hole in burner tube and
around manifold (C).
Side burner
control knob
Screws and washers
removed from valve
bracket
Valve
Wing Nut
Qty. 1
Valve stem
come through
this hole
Side burner Bezel
Valve bracket
Venturi Clip
A
B
Valve stem
Side burner heat shield
Side burner
Stud
Side burner
drip pan
C
Wing nut
464323113 · 25