Assembly - Kenmore 415.23667310 Manual De Uso Y Cuidado

ASSEMBLY

Place left side panel upside down. Insert Caster Pin into the caster mounting plate to lock
1 1
caster in place for tightening, shown A. Spin the caster clockwise into the threads on the legs
of left side panel until secure. Remove Caster Pin and repeat above to install casters on right
side panel. Make sure the two locking casters are secured at the rear and the non-lock casters
are secured at the front. After all 4 casters are secured save the Caster Pin for future caster
removal or attachment.
Locking caster
Left side
panel
Rear
Attach bottom shelf to left and right side panel with four 1/4-20x1/2" screws.
2
Left side
panel
1/4-20x1/2" Screw
Qty. 4
18 · 464323113
Non-locking caster
Locking caster
Front
1/4-20x1/2" Screw
Front
Right side panel
(with large hole
near front)
Rear
Bottom shelf
A
Caster pin
Caster pin
Note: Tank hole
must be near right
side panel.
Right side panel
(with large hole
near front)