Included Items; Technical Information; General Safety Advice - Parkside PHKS 1450 LASER Instrucciones De Utilización Y De Seguridad

Guide fence slot
11
Guide fence
12
Laser unit
13
Laser ON / OFF switch
14
Cutting depth scale
15
Riving knife
16
Auxiliary handle
17
Drive spindle
18
Mounting flange
19
Clamping flange
20
Clamping screw with washer
21
Riving knife mounting
22
Mounting screws
23
Adapter for vacuum sawdust removal
24

Included items

Q
1 Circular saw
1 Guide fence
1 Adapter for vacuum sawdust removal
1 Allen key
2 Batteries, micro AAA 1.5 V (for laser)
1 Operating instructions
1 „Warranty and service" booklet

technical information

Q
Nom. power input: 1450 W
Rated voltage: 230 V ~ 50 Hz
Mechanical output: 15 Nm max.
No-load speed: n
Saw blade: 210 x 30 x 1.8 x 2.6 mm
Cutting depth at 90°: 0 - 75 mm
Cutting depth at 45°: 0 - 49 mm
Protection class: II / &
noise and vibration data:
Values determined in accordance with EN 60745
The sound pressure level (A-weighted) of the device
is typically 107,5 dB (A). Uncertainty K=3 dB. The
sound level while working can exceed 120,5 dB (A).
Wear ear protection!
1800 - 5000 min
-1
0
Introduction / General safety advice
Evaluated acceleration, typical:
Hand / arm vibration a
h
Uncertainty K = 1,5 m / s
WARnInG!
The vibration level given
in these instructions has been measured in
accordance with a standardised measurement
procedure specified in EN 60745 and can be used
to compare devices. Different uses of the device
give rise to different vibration levels and in many
cases they may exceed the values given in these
instructions. It is easy to underestimate the vibration
load if the electrical power tool is used regularly in
particular circumstances.
note: If you wish to make an accurate assessment
of the vibration loads experienced during a particular
period of working, you should also take into account
the intervening periods of time when the device is
switched off or is running but is not actually in use.
This can result in a much lower vibration load over
the whole of the period of working.

General safety advice

Q
J
Attention! Please read all the instructions
and advice. Failure to observe the instructions
and advice given below may result in electric
shock, fire and / or serious injury.
= 2,309 m / s
2
2
GB/MT 31