Features - Ryobi HP37 Manual Del Operador

SERVICE
Servicing requires extreme care and knowledge and should
be performed only by a qualified service technician. For
service we suggest you return the product to the nearest
AUTHORIZED SERVICE CENTER for repair. When
servicing, use only identical replacement parts.
WARNING:
The operation of any power tool can result in foreign objects being thrown into your eyes, which can
result in severe eye damage. Before beginning power tool operation, always wear safety goggles or
safety glasses with side shields and, when needed, a full face shield. We recommend Wide Vision
Safety Mask for use over eyeglasses or standard safety glasses with side shields. Always use eye
protection which is marked to comply with ANSI Z87.1.
WARNING:
Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals
known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to
these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks
that are specially designed to filter out microscopic particles.
PRODUCT SPECIFICATIONS
Motor ................................................................. 3.6 Volt DC
Switch ...........................................Single Speed/Reversible
No Load Speed ........................................ 180 r/min. (RPM)
Clutch ..............................................................  Positions
kNOW yOUR SCREWDRIVER
See Figure 1.
The safe use of this product requires an understanding of the
information on the product and in this operator's manual as
well as a knowledge of the project you are attempting.Before
use of this product, familiarize yourself with all operating
features and safety rules.
SWITCH
Your screwdriver is equipped with a rocker type switch
which turns the screwdriver ON and OFF. This switch also
controls the forward and reverse feature.
SyMBOLS
SAVE THESE INSTRUCTIONS

FEATURES

7 — English
WARNING:
To avoid serious personal injury, do not attempt
to use this product until you read thoroughly and
understand completely the operator's manual. If you
do not understand the warnings and instructions in the
operator's manual, do not use this product. Call Ryobi
customer service for assistance.
Torque ..................................................................... 50 in.lb.
Charger Input.................................... 10 V, 60 Hz, AC only
Charge Rate .....................................................10-1 hours
STICk/PISTOL COMBINATION
Your screwdriver has been designed so that it can be operated
as a stick screwdriver or a pistol screwdriver.
TORQUE ADJUSTMENT RING
Your screwdriver has a -position clutch. The torque adjust-
ment ring can be turned to select the right amount of torque
for the application.
LIGHT
Your screwdriver has a built-in light. This feature is convenient
when working in close or tight areas where additional light
is needed.