Before You Begin; Tools Needed - Barrette 34111554 Instrucciones De Instalación

WARNING:
• Improper installation of this product can result in personal injury. Always wear safety goggles when
cutting, drilling and assembling the product.
• Incorrect installation may cause harm to the product or individual.
NOTICE:
• DO NOT attempt to assemble the kit if parts are missing or damaged.
• DO NOT return the product to the store, for assistance or replacement parts call: 1-800-336-2383.

BEFORE YOU BEGIN:

It is the responsibility of the installer to
meet and/or exceed all code and safety
requirements and to obtain all required
building code permits.
The deck and railing installer should
determine and implement appropriate
installation techniques for each installation.
MATERIALS NEEDED:
Level Railing Kit
Gate Kit
Components:
Description
Aluminum Uprights with Caps
Gravity Latch with Hardware
Telescoping Metal Braces
#8 x ⁄ " Screws (For Metal Braces)
3
4
#8 x ⁄ " Screws (For Metal Braces)
3
8
#8 x ⁄ " Screws (For Bottom Rail Brackets)
3
4
Compact Butterfly Hinges with Hardware
Aluminum Rail Aluminum Rail
Uprights with Caps Uprights with Caps
To obtain and review a copy of the warranty please visit barretteoutdoorliving.com. You may also contact
us at 1-800-336 2383 or email [email protected]
2

TOOLS NEEDED:

*If using a chopsaw, use a fine-tooth carbide blade.
Metal Braces
Screws for
Metal Braces
Safety Glasses
Pencil
Level
Chalk Line
⁄ ", ⁄ " & ⁄ " Drill Bits
3 1 3
8 8 32
Drill
Hacksaw or Chopsaw
Tape Measure
Scissors or Utility Knife
Tape
Rubber Mallet
Fine-tooth Carbide Blade*
(2) 2" Wood Blocks
Compact Butterfly
Hinges with Hardware
Gravity Latch
with Hardware