Idiomas disponibles
Idiomas disponibles
Install
Heat
Diffusers,
Cooking
Grates,
Warming
Rack
[]
Insert
the Heat Diffusers
into the firebox
by placing
them into the indentations
in the front
and back
of the firebox.
See Inset
1.
[]
Place the Cooking
Grates into the firebox.
See inset 2.
[]
Insert
the Warming
Rack into the top of the firebox.
See Inset 3. The raised lip goes towards
the
back of the firebox.
Inset
3
Inset
1
Inset
2
Place and Secure
LP Cylinder
into the Cabinet
[]
Unscrew
the bolt and nut located
below the large opening
in the left side cabinet panel. Attach
the Regulator
Hose Support
Rings, located
on the regulator
hose, to the left side cabinet
panel
using the same bolt and nut. See Inset
1
[]
Hook the ends of the Cylinder
Support
Ring into the two holes in the left front and rear legs.
See Inset
2. Note: You may need to spread
the ends apart for the ring to reach and securely
fit
into the holes.
[]
Place the LP cylinder
down into the tank support
hole in the bottom
of the cabinet.
Ensure the
valve faces to the side. Wrap the Cylinder
Support
Ring around
the top of the tank and hook
together
to secure the LP cylinder
in place. See Inset
3.
Do not Hook Up the LP Cylinder
to the Regulator
Assembly
at this time,
Inset
2
\
2 Regulator
Hose
Support
Rings
Inset
1
17
Inset
3
