Idiomas disponibles
Idiomas disponibles
1_
Install
Side Burner
Valve
[]
Locate the side burner
ignition
wire underneath
the main burner
control
panel. It will be labeled.
Feed side burner valve and igniter
wire through
hole in left side of cabinet.
[]
Open side burner
lid and cut tie wrap securing
grate
to pan. On underside
of pan, remove
the 2
screws holding
the side burner
in place. See Inset
1.
[]
Secure the side burner valve stem to the Side Burner
Lower Control
Panel using 2 Phillips Head
Bolts(IVl4x8mm).
See Inset 2.
[]
Center the side burner valve into the side burner
tube. See Inset 3. Reattach
side burner
to pan
with 2 previously
removed
screws.
[]
Use 1 Phillips
Head Bolt (M4x8mm)
to attach the Side Burner
Lower Control
Panel to the firebox.
See Inset 4.
Inset
1
Inset
2
Phillips
Head Bolt M4x8mm
Qty: 3
Inset
3
Inset
4
1_
Attach
Side Burner
Control
Knob and Side Burner
Ignition
Wire
[]
Attach
the side burner
ignition
wire over the side burner
connector pin. See Inset
1.
[]
Push the Side Burner
Control
Knob onto the valve stem.
See Insert
2
Inset
1
Inset
2
16
