Care Instructions - ICON STRYKER RIG Manual Del Usuario

Environmental conditions that will degrade the performance of the Stryker Rig:
Contamination with foreign substances and/or improper care can seriously compromise the effectiveness of the Stryker Rig and the impact protectors
and back protector attached to it and reduce their performance. Do not expose the Stryker Rig or the impact protectors and back protector attached to
it to extreme direct sunlight or extreme moisture. Do not expose the Stryker Rig or the impact protectors and back protector attached to it to extremely
high or low temperatures like those found in a closed car or outdoor storage.

CARE INSTRUCTIONS:

Cleaning:
Do not wash Stryker Rig or the impact protectors and back protector attached to it with water. Remove any dirt with a damp cloth. Dry by laying the
Stryker Rig flat on a towel in a well-ventilated area. Do not use hair dryers or other heaters. Do not use solvents or other toxic substances to clean the
Stryker Rig or the impact protectors and back protector attached to it.
Maintenance:
Never modify any part of the Stryker Rig or the impact protectors and back protector attached to it.
Storage:
Store the Stryker Rig in a dry, ventilated area away from sunlight or direct heat. Ensure that the impact protectors and back protector attached to it
cannot be crushed, hit, dropped, or otherwise damaged by impact, and that they are not stored under heavy objects. Do not store the Stryker Rig or
the impact protectors and back protector attached to it with their weight distributed across a few, single points only. If wet after use, before storing,
dry the Stryker Rig and the impact protectors and back protector attached to it in a ventilated space at room temperature; do not use hair dryers or
other heaters.
Transport:
Ensure that the Stryker Rig and the impact protectors and back protector attached to it, cannot be crushed, hit, dropped, or otherwise damaged by
impact and that they are not transported under heavy objects. Never fold the impact protectors or back protector. Do not expose the Stryker Rig and
the impact protectors and back protector attached to it to extremely high or low temperatures like those found in a closed car.
Spare parts:
No spare parts are available for the Stryker Rig, the impact protectors, or the back protector.
disposal:
At the end of the Stryker Rig's useful life, do not discard it into the environment. Dispose of this product according to your local disposal requirements.
12
MATERIALS CONTENT:
Body: Upper Sleeve, Shoulder: 100% Polyester
Side Panels, Sleeve Panels: 80% Nylon, 20% Elastane
Padding: 80% Polyethylene, 20% Polyurethane
Plastic Parts: 100% Polypropyleyne
Exclusive Of Decoration
This product contains no known harmful substances.
SAFETy WARNINGS
WAIVER ANd RELEASE by OWNER
NO PERSONAL PROTECTIVE EQUIPMENT IS ABLE TO SAFEGUARD AGAINST ALL IMPACTS. NO PERSONAL PROTECTIVE EQUIPMENT CAN
OFFER COMPLETE PROTECTION AGAINST ALL INJURIES. MOTORCYCLING IS INHERENTLY DANGEROUS IN NATURE AND USE OF THIS
EQUIPMENT CANNOT PREVENT INJURY OR DEATH. WHEN USING THIS EQUIPMENT, THE USER ASSUMES ALL RISK ASSOCIATED WITH
THIS ACTIVITY, WHICH MAY CAUSE INJURY OR DEATH. THE USER HEREBY WAIVES ALL CLAIMS AGAINST ICON® (A DIVISION OF LEMANS
CORPORATION) AND LEMANS CORPORATION FOR DEATH OR INJURY TO HIS OR HER PERSON AND HEREBY COVENANTS TO NOT SUE FOR
ANY CLAIMS ARISING AS A RESULT OF INJURY OR DEATH WHILE USING ICON® PRODUCTS.
13