ICON STRYKER RIG Manual Del Usuario página 6

PERFORMANCE
The Stryker Back Armor has undergone EC Type Examination to assure compliance with Directive
89/686/EEC. It has additionally been examined and tested to assure its compliance with the
appropriate technical Standard.
Chart 3: Type Examination Test Results:
Contains Impact Protector
Sex Stryker Rig Size
Version
Stryker Rig Men's Stryker Rig Shoulder
Male
M/L or XL/2XL Protector
Stryker Rig Men's
Male Stryker Rig Elbow Protector
M/L or XL/2XL
Contains back Protector
Sex Stryker Rig Size
Version
Stryker Rig Back Protector
Stryker Rig
Male
Exterior shell with 7 plastic
Men's M/L
plates
Stryker Rig Back Protector
Stryker Rig
Male Exterior shell with 7 plastic
Men's XL/2XL
plates
*
Mean value of impact test results shall exceed 35 kN and no single impact test value shall exceed 50 kN.
Level 1: Mean value of impact test results shall be below 18 kN and no single impact test value shall exceed 24 kN,
Level 2: Mean value of impact test results shall be below 9 kN and no single impact test value shall exceed 12 kN,
08
Average Value
Protection Level According
Protector Technical of Force
to EN 1621-1:1997,
Position Standard Transmitted with
50J of Energy
Shoulder EN 1621-1:1997 28.9 kN
Elbow EN 1621-1:1997 29.8 kN
Average Value
Protector Technical of Force Protection Level According
Position Standard Transmitted with to EN 1621-2:2003
50J of Energy
Back
EN 1621-2:2003
16.0 kN
Back EN 1621-2:2003 16.0 kN
Note: Additional Features - The chest plate on the front panel of the Stryker Rig has also been submitted to RICOTEST s.r.l., notified body number
0498, for additional testing to assure compliance with Directive 89/686/EEC and its performance in accordance with the impact test requirements of
technical Standard: EN 14021:2003 "Stone shields for off-road motorcycling suited to protect riders against stones and debris – Requirements and
test methods", Section 4.7. According to Section 4.7 and 5.1.2, and 6.6, after an impact force of 10 J, the average peak force recorded below the
anvil, shall be below 27 kN. The test of the chest plate on the front panel of the Stryker Rig resulted in a peak force of 4.7 kN.
In order to identify the areas of the Stryker Rig that absorb energy, see the Diagrams and chart
below:
diagram 4A: Area of elbow and shoulder protectors attached to Stryker Rig that absorb(s) energy:
Clause 5 *
"S" = Shoulder
Protector
Pass
Pass
Level 1
Level 1
"S" = Shoulder "S" = Shoulder
Protector Protector
"E" = Elbow
Protector
"S" = Shoulder
Protector
"E" = Elbow
Protector
09