Using The Cassette; Playing A Cassette Tape; Recording On A Cassette Tape - Kenwood HM-337-SG Manual De Instrucciones

Using the cassette

Playing a cassette tape

1 Press TAPE button to TAPE.
2 Press the area marked push open to open the
cassette compartment door.
3 Insert cassette tape into the compartment with
the open edge facing down.
4 Close the door securely.
5 Press 4 or ¢ button (4 or ¢ SEARCH/
SKIP/TUNING button on the remote control)
to move tape to the desired starting point.
6 Press 6 button (6 PLAY/PAUSE button on
the remote control) to begin playing the tape.
7 Press volume buttons (VOLUME UP or
DOWN button on the remote control) and press
EQ/X-bass button (EQ/X-BASS on the remote
control) to desired listening level.

Recording on a cassette tape

You can record from the radio or the CD player.
For best recording, use a normal bias tape (Type 1
only).
Recording from the radio
1 Insert a cassette tape into the tape compart-
ment and close door.
2 Press TUNER/band button (TUNER/BAND
button on the remote control) to TUNER and
select a radio station.
3 Press rec button (REC button on the remote
control) to set the unit into recording standby
mode.
The icon "REC. " appears on the display.
4 Press 6 button (6 PLAY/PAUSE button on
the remote control) to begin recording.
5 Press 7 button (STOP 7 button on the remote
control) to end recording.
Radio recording tip
• To temporarily pause the recording, press rec
button (REC button on the remote control).
Press 6 button (6 PLAY/PAUSE button on
the remote control) to resume recording.
Recording from a CD
1 Insert a blank cassette tape into the tape deck.
2 Press CD button to CD.
3 Insert a disc and make sure that the unit is in
stop mode.
4 Press 4 or ¢ button (4 or ¢ SEARCH/
SKIP/TUNING button on the remote control)
to select the first track you want to record.
5 Press rec button (REC button on the remote
control) to set the unit into recording standby
mode.
The icon "REC. " appears on the display.
6 Press 6 button (6 PLAY/PAUSE button on
the remote control) to begin recording.
The icon "SYNC" appears on the display.
Press rec button (REC button on the remote
control) to interrupt recording. Press 6 but-
ton (6 PLAY/PAUSE button on the remote
control) to resume recording.
7 Press 7 button (STOP 7 button on the remote
control) to end recording.
Notes:
• To ensure good system performance, wait until the
unit completely reads the disc before recording.
• During recording, it is not possible to listen to an-
other source.
13
EN