Mounting Basic Stop And Protective Sleeve - Rohm CAPTIS-M Traducción De Las Instrucciones De Servicio Originales

5.3 Mounting Basic Stop and Protective Sleeve

1 Threaded pins
2 Basic stop
1. Undo the three threaded pins (1).
2. Remove the inserted insert from the front.
3. Insert the new insert.
4. Tighten the three threaded pins (1). For tightening torque, see
Chapter 3.2 Technical Specifications, page 62.
 Insert replaced.
122017 / 1.0
Notice
Damage due to chips entering.
Fast closing and malfunction of the collet chuck CAPTIS-M.
 Never operate the collet chuck CAPTIS-M without an
insert.
1 2
3 Protective sleeve
Assembly
3
75