EGO Power+ ST1210E Manual Del Usuario página 12

STARTING/STOPPING THE STRING TRIMMER
EN
Before starting the string trimmer
◾ ◾
Make sure you have a secure and balanced footing.
◾ ◾
Stand upright and hold the string trimmer in a relaxed position.
◾ ◾
Make sure that the cutting line is not touching the ground or any other objects.
◾ ◾
Hold the string trimmer with both hands: One hand on the rear handle and one
hand on the front-assist handle.
To start the string trimmer
(Fig. 14)
1. Press down the lock-off lever and
hold it in that position.
2. Depress the trigger to turn on the
string trimmer.
The motor runs only when the
lock-off lever and trigger are
operated simultaneously.
To stop the string trimmer
Release the lock-off lever and trigger to stop the string trimmer.
WARNING:
Always remove the battery pack from the string trimmer
during work breaks and after finishing work.
USING THE STRING TRIMMER
WARNING:
To avoid serious personal injury, wear goggles or safety glasses at
all times when operating this unit. Wear a face mask or dust mask in dusty locations.
Clear the area to be cut before each use. Remove all objects, such as rocks, broken
glass, nails, wire, or line, that can be thrown or become entangled in the cutting
attachment. Clear the area of children, bystanders, and pets. At a minimum, keep all
children, bystanders and pets at least 30m away; there still may be risk to bystanders
from thrown objects. Bystanders should be encouraged to wear eye protection. If you
are approached, stop the motor and cutting attachment immediately.
22
56V LITHIUM-ION CORDLESS STRING TRIMMER — ST1210E
14
Lock-off Lever
Trigger
WARNING:
To prevent serious personal injury, remove the battery pack from the
tool before servicing, cleaning, changing attachments or removing material from the unit.
Before each use check for damage/worn parts
Check the bump head, guard and front-assist handle and replace the parts that are
cracked, warped, bent, or damaged in any away.
The line-cutting blade on the edge of the guard can dull over time. It is recommended
that you periodically sharpen it with a file or replace it with a new blade.
WARNING:
Always wear gloves when mounting the guard or sharpen or
replacing the blade. Take care of the blade on the guard and protect your hand from
cutting.
After each use, clean the trimmer.
WARNING:
To prevent serious personal injury, remove the battery pack
from the tool before servicing, cleaning, changing attachments or removing material
from the unit.
◾ ◾
Use only mild soap and a damp cloth
to clean the tool. Never let any liquid
get inside the tool; never immerse
any part of the tool into a liquid.
◾ ◾
Wipe off the unit with a clean, dry,
soft cloth.
◾ ◾
Keep air vents in the motor housing
and shaft free from debris at all
times (Fig. 15).
CAUTION:
Obstructions in the
vents will prevent the air from flowing
into the motor housing and result in
overheating or damaged of the motor.
WARNING:
Never use water for cleaning your trimmer. Avoid using solvents
when cleaning plastic parts. Most plastics are susceptible to damage from various
types of commercial solvents. Use clean cloths to remove dirt, dust, oil, grease, etc.
56V LITHIUM-ION CORDLESS STRING TRIMMER — ST1210E
15
Air vents
in shaft
Air vents in
motor housing
23
EN