Urmet 1122 Manual Del Usario página 20

OPERATION
DOOR PHONE FRONT DESCRIPTION
2
3
4
5
6
CALL TONE SELECTION
Proceed as follows with the system in stand-by to select the call tone:
1. Hold the pedestrian door and the garage gate opening button at the
same time pressed for one second. The door phone will output the
call tone currently in use.
2. Holding the garage gate opening button pressed, release and press
the pedestrian door opening button and wait for the next call tone.
3. Release both buttons when you hear the required call tone.
§
The doors may be opened by mistake if the buttons are not
pressed at the same time.
CALL MANAGEMENT
The following events will occur when the calling button is pressed:
• The name tag backlighting will go off for a time.
• The door phones will emit a call tone according to the priority defi ned by dip switch 2 (if mute function
is not selected).
• The blue LED on all the door phones will start blinking.
The user can activate audio and start a conversion with the caller for three minutes. To establish a
conversation, in "hands-free" mode, briefl y press
The following events will occur when audio is turned on:
• The name tag backlighting goes out for as long as the conversation is in progress.
• The door phone blue audio LED will light up fi xed.
• The blue LED of the other door phones will start blinking rapidly to indicate busy state.
To end the conversation before the three minute timeout, in "hands-free" mode, briefl y press
to-talk", release .
AUTO-ON
Audio can be turned on from any of the door phones at any time (with the procedure of the chosen operating
mode) to establish communication with the calling station even when the system is standing by.
20
1. Switch for adjusting calling volume
1
Maximum calling
2. Pedestrian door opener button
3. Door open indicator LED (only if system setup includes this function)
4. Garage gate door opener button
5. Audio on/off button
6. Audio state activation LED
Off:
Steady on:
Slow fl ashing: call in progress
Fast fl ashing: system busy (another door phone is communicating with
Minimum calling
volume volume
system in stand-by
audio on (communication in progress)
the calling station)
, in "push-to-talk", hold
Red
No calling tone
pressed.
, in "push-
DS1122-004C