Safety Instructions; Safety Sign - koban KPF 01 Manual De Instrucciones

Safety Instructions

Please carefully read the instruction manual before using the tester, and pay
special attention to "Warning" content. Please follow instructions under
"Warning".
1. Please be very careful when test voltage is higher than AC 30 V, and do
keep in mind that your finger shall not exceed the hand-shielding part of
the test probe.
2. Do not measure voltage which is higher than the allowed input limit.
3. Before use, please check the meter and test probe; do not carry out
testing in case the test probe is naked, tester housing is damaged, or
there is no LCD display, etc..
4. It meets requirements of safety standards only when the meter is used
together with the supplied test probes. In case the test probe is damaged
and needs replacement, it is required to replace it with a test probe of the
same model and identical electrical specifications.
5. Please never carry out any voltage measurement whenever the test probe
is inserted in any current outlet.
6. Please do not expose the meter to strong light, high temperature, or
dampness.
The digital power meter is designed and manufactured in accordance with
international standard, IEC61010-1, and international safety specification,
IEC1010-2-032, and the meter strictly follows the safety standard of double-
insulation AC 600 V CAT III.

Safety Sign

Caution, risk of danger (Important safety information; refer
to the operation manual.)
Application around and removal from HAZARDOUS LIVE
conductors is permitted.
Earth ground
Double insulation (Protection classⅡ)
Battery low Indicator
www.grupotemper.com
Power harmonic clamp meter
Instructions manual |
KPF-01
19