Tabla de contenido
Printer output connector
Prise de sortie imprimante
Conector de salida del
impresor
148
AC adapter
Adaptateur secteur
Adaptador de CA
Parallel port
Port parallèle
Conexión en
paralelo
P-300
PRINTING PICTURES
E
HOW TO CONNECT TO THE PRINTER
Make sure that the power of the P-300 printer and the camera
are off before connecting.
1
Connect the exclusive (parallel) cable (provided with the
P-300) to the Parallel port of the printer.
2
Open the connector cover of the camera.
3
Connect the exclusive (parallel) cable to the Printer output
connector of the camera.
4
Connect the optional AC adapter to the camera.
5
Turn on the power of the printer and the camera.
The Selftimer signal blinks while printing, and other
operations are disabled.
The recording date/time can be printed if PRINT (TIME) is
set (except in MIRROR PRINT and MULTIPLE PRINT).
(p. 144)
Note:
Because printing is controlled by the camera, the
buttons on the printer are invalid. (Printing will
stop when the power is turned off.)
The LCD monitor display goes off while printing.
When the camera is not operated for approx. 12
seconds, it cancels the print mode.
Tabla de contenido
