Connecting Your Appliance To The; Before Using For The First Time; Kenwood App; Wi-Fi Menu - Kenwood CCL45 Instrucciones

before plugging in
Make sure your electricity supply is the same as the
l
one shown on the underside of the appliance.
WARNING: THIS APPLIANCE MUST BE
l
EARTHED.
This appliance conforms to EC Regulation
l
1935/2004 on materials and articles intended to
come into contact with food.
This appliance contains and uses wireless module
l
FCC ID VVJ-TA3200R1D-SA

before using for the first time

Remove the plastic blade covers from the blade.
l
These covers should be discarded as they are to
protect the blade during manufacture and transit only.
Wash the parts: see 'care and cleaning'.
l

Wi-Fi Menu

Factory reset the Wi-Fi, turn the unit's Wi-Fi On/Off and display the unit's MAC address.
1 When the unit is in stand-by mode, press the increase (+) button for 3 seconds.
2 Press the (+) and (-) buttons to scroll through the menu and press the OK button to confirm the required
option.
3 To exit the Wi-Fi menu press the Cancel button. The unit will also return to standby mode if inactive for 10
seconds.
FACTORY RESET WI-FI
WI-FI ON
WI-FI OFF
MAC:
Selecting this option will erase all Wi-Fi data stored on the unit and restore it to
factory settings.
When selected, the unit will return to the standby mode.

important

When disposing of the unit, it is important to factory reset the unit to protect
your personal data.
Selecting this option with turn the unit's Wi-Fi on.
When selected, the unit will return to the standby mode.
Note: Wi-Fi will be ON by default.
Selecting this option with turn the unit's Wi-Fi off.
When selected, the unit will return to the standby mode.
This option will automatically display the appliance's Wi-Fi MAC address.
connecting your appliance
to the Kenwood app
The Kenwood app will allow you to control your
appliance through your smart phone or tablet.
1 Download the Kenwood app on to a smart phone
or tablet device.
2 Once the download is complete, open the app and
follow the instructions on the screen.
PIN number
This will be required when prompted by the Kenwood
l
app.
The appliance can only be connected when the PIN
l
Number is shown on the display screen. If the PIN is
entered incorrectly, follow the instructions on the app
and retry.
To display the unit's PIN number, press and hold the
l
OK button for 3 seconds.
Note:
Wi-Fi
Operates with IEEE802.11 b,g and n at 2.4 GHz
only, and connects to networks using WPA2-PSK
Compatibility
Kenwood app compatible with latest versions of
iOS and Android.
7