Flex ADM1 Instrucciones De Funcionamiento página 18

To take another measurement:
n Press Measurement button (6) once.
n Aim laser dot at the required target.
n Press Measurement button again (6)
to take the measurement.
The readings are saved in the memory unless
they are deleted with the Delete button (9).
To take the measurement again, repeat the
process.
On completion of work:
n Switch off the power tool.
Using measurement and
calculation modes
'EYXMSR
(S RSX TSMRX E PEWIV FIEQ EX TIVWSRW SV
ERMQEPW (S RSX PSSO MRXS XLI PEWIV FIEQ
2IZIV PSSO MRXS XLI PEWIV FIEQ IMXLIV HMVIGXP]
SV [MXL STXMGEP MRWXVYQIRXW
The following measurement and calculation
modes are available:
Area calculation
Volume calculation
Indirect distance measurement
(Pythagoras)
Area calculation
n Switch on the device.
n Press
button.
The symbol lights up on the display (2).
The first side of the symbol flashes.
n Press Measurement button (6) once.
18
The laser beam
symbol and the last
reading are indi-
cated on the display
(2).
The new reading
is indicated on the
lower line of the
display (2).
n Aim laser dot.
n Press Measurement button again (6)
to take the measurement.
The first reading is indicated on both lines
of the display. The second side of the
symbol flashes.
n Aim laser dot again.
n Press Measurement button (6) to take
the second measurement.
To take the measurement again, repeat the
process.
On completion of work:
n Switch off the power tool.
Volume calculation
n Switch on the device.
n Press
button.
The symbol lights up on the display (2).
The first side of the symbol flashes.
n Press Measurement button (6) once.
n Aim laser dot.
n Press Measurement button again (6)
to take the measurement.
The first reading is indicated on both lines
of the display. The second side of the
symbol flashes.
n Aim laser dot again.
n Press Measurement button (6) to take
the second measurement.
The second reading is indicated on the
upper line, an intermediate result (area in
m²) on the lower line. The third side of the
symbol flashes.
n Aim laser dot again.
n Press Measurement button (6) to take
the third measurement.
Operating instructions
The second reading
is indicated on the
upper line, the result
on the lower line.